DL 6T / 6TH / 8T / 8TH / 10T / 10TH

Contact An Agent

DL 8T(0)

http://dmcamerica.com/

Machine Strong Point
Greatly shortened non cutting time and fast machining with the LM guide. Elaborately machined spindle and spindle head are assembled in a temperature-controlled room for the highest quality and maximum stability. Excellent dynamic characteristic and greatly reduced idle time. You can easily remove chips from the front side of the machine even without a chip conveyor.

Machine Specifications
DESCRIPTION DL 6T DL 8T DL 10T
Max. Turning Dia. 280 (11.02) 280 (11.02) 280 (11.02)
Max.Turning Length 320 (12.60) 300 (11.81) 270 (10.63)
Max. Spindle Speed 6.000 4.500 3.500
Spindle Nose A2-5 A2-6 A2-8
Standard Chuck Size 6 8 10
Main Spindle Motor (Cont./30min) 11/15 (15/20) 11/15 (15/20) 11/15 (15/20)
X axis travel 165 (6.50) 165 (6.50) 165 (6.50)
Z axis travel 350 (13.78) 350 (13.78) 300 (11.81)
X axis rapid traverse rate 30 (1.181) 30 (1.181) 30 (1.181)
Z axis rapid traverse rate 36 (1.417) 36 (1.417) 36 (1.417)
Max. No. of Tools 12 10 10

 

DESCRIPTION DL 6TH DL 8TH DL 10TH
Max. Turning Dia. 280 (11.02) 280 (11.02) 280 (11.02)
Max.Turning Length 520 (20.47) 510 (20.80) 485 (19.09)
Max. Spindle Speed 6.000 4.500 3.500
Spindle Nose A2-5 A2-6 A2-8
Standard Chuck Size 6 8 10
Main Spindle Motor (Cont./30min) 11/15 (15/20) 11/15 (15/20) 11/15 (15/20)
X axis travel 165 (6.50) 165 (6.50) 165 (6.50)
Z axis travel 530 (20.47) 530 (20.47) 530 (20.47)
X axis rapid traverse rate 30 (1.181) 30 (1.181) 30 (1.181)
Z axis rapid traverse rate 30 (1.181) 30 (1.181) 30 (1.181)
Max. No. of Tools 12 10 10